How to Fix Blue Screen Errors – KERNEL AUTO BOOST LOCK ACQUISITION WITH RAISED IRQL

If you have ever encountered a Blue Screen error, you know how frustrating and disruptive it can be. One particular Blue Screen error that users have reported is the KERNEL AUTO BOOST LOCK ACQUISITION WITH RAISED IRQL. This error can occur when using Bluetooth devices or wireless adapters, and even when connected to a wireless hard drive. In this article, we will explore various solutions to fix this issue and get your system back up and running smoothly.

Understanding the Blue Screen

The KERNEL AUTO BOOST LOCK ACQUISITION WITH RAISED IRQL bug check has a value of 0x00000192. This error indicates that a lock tracked by AutoBoost was acquired while executing at DISPATCH_LEVEL or above. While the technical details may be complex, the bottom line is that this error can cause your system to crash and display the dreaded Blue Screen. To resolve this issue, we will discuss several potential solutions that have been successful for users facing this problem.

Solution 1) Disconnect the External Hard Drive

One common cause of this blue screen is a connected external hard drive. If you have an external hard disk connected to your computer, try disconnecting it and see if the error persists. Some users have reported that their systems started working fine after removing the external hard disk, indicating that the issue may be related to a bad sector or hardware malfunction.

To disconnect the external hard drive, make sure your computer is turned off and then unplug the USB connection. Restart your computer and check if the Blue Screen error still occurs. If the error is resolved, it is recommended to scan the external hard drive for any potential issues or consider replacing it if necessary.

Solution 2) Disable Bluetooth Settings from the BIOS

If you are using Bluetooth devices and experiencing the Blue Screen error, it is worth considering disabling Bluetooth settings from the BIOS and updating the Bluetooth driver. Some users have reported that disabling Bluetooth from the BIOS resolved the issue for them, indicating that the problem may be caused by a faulty driver.

To disable Bluetooth settings from the BIOS, you will need to restart your computer and access the BIOS settings. The specific steps to access the BIOS may vary depending on your computer’s manufacturer. Once in the BIOS, look for the Bluetooth settings, which are usually located under the “Security” or “I/O Port Access” section. Disable Bluetooth and save the changes.

After disabling Bluetooth, you can update the Bluetooth driver to ensure that you have the latest version installed. You can update the driver through the Device Manager or by downloading the latest driver from the manufacturer’s website. Make sure to follow the appropriate steps for your specific operating system and Bluetooth device.

Solution 3) Roll Back the Bluetooth Driver

If updating the Bluetooth driver did not resolve the Blue Screen error, you can try rolling back the driver to a previous version. A recent driver update may be causing compatibility issues and triggering the blue screen.

To roll back the Bluetooth driver, follow these steps:

  1. Press the Win+R key to open the Run dialog box.
  2. Type devmgmt.msc and press Enter to open the Device Manager.
  3. In the Device Manager, expand the Bluetooth category.
  4. Right-click on the Bluetooth driver and select Properties.
  5. Go to the ‘Driver’ tab and click on Roll Back Driver.
  6. Follow the on-screen instructions to revert to the previous version of the driver.
  7. Restart your computer and check if the Blue Screen error is resolved.

If the option to roll back the driver is grayed out, it means that there is no previous version available. In that case, you can try updating the driver again or consider other solutions.

Solution 4) Uninstall the Wireless Adapter Driver

Another potential cause of this blue screen is a faulty wireless adapter driver. To fix this issue, you can try uninstalling the wireless adapter driver and then restart your computer. This will allow Windows to reinstall the driver and potentially resolve any conflicts or issues causing the Blue Screen error.

To uninstall the wireless adapter driver, follow these steps:

  • Press the Win+R key to open the Run dialog box.
  • Type devmgmt.msc and press Enter to open the Device Manager.
  • In the Device Manager, expand the Network adapters category.
  • Right-click on the wireless network adapter and select Uninstall device.
  • Follow the on-screen instructions to uninstall the driver.
  • Restart your computer and let Windows reinstall the driver automatically.

After the driver is reinstalled, check if the blue screen persists. If the error is resolved, you can proceed with using your wireless adapter as usual.

Uninstall the Wireless Adapter Driver for Blue Screen Resolution

Solution 5) Disconnect the NDAS Device from Your System

Some users have reported that this blue screen was caused by a connected Network Direct Attached Storage (NDAS) device. Certain manufacturers may not have developed optimized drivers for Windows 10/11, leading to compatibility issues and Blue Screen errors. If you have an NDAS device connected to your computer, try disconnecting it and see if the error is resolved.

To disconnect the NDAS device, simply unplug it from your computer and restart the system. Check if the Blue Screen error still occurs. If the error is no longer present, it is recommended to contact the manufacturer of the NDAS device for any available driver updates or further support.

Solution 6) Perform a System Restore

If none of the previous solutions have resolved the blue screen, you can try performing a system restore. System Restore allows you to revert your computer’s settings to a previous state when the Blue Screen error was not occurring. This can help eliminate any recent changes or updates that may have caused the error.

To perform a system restore, follow these steps:

  • Press the Win+R key to open the Run dialog box.
  • Type rstrui and press Enter to open the System Restore utility.
  • Follow the on-screen instructions to choose a restore point.
  • Select a restore point from a time when the Blue Screen error was not occurring.
  • Confirm the restore point selection and proceed with the restoration process.
  • Wait for the system restore to complete and restart your computer.

After the system restore is finished, check if the KERNEL AUTO BOOST LOCK ACQUISITION WITH RAISED IRQL error is resolved. If the error persists, it may be necessary to seek further assistance from technical support or consider other troubleshooting options.

Perform a system restore to resolve kernel auto boost lock acquisition with raised irql blue screen

Conclusion

The KERNEL AUTO BOOST LOCK ACQUISITION WITH RAISED IRQL Blue Screen error can be daunting, but with the appropriate troubleshooting steps, it can be resolved effectively. By methodically applying the solutions provided in this article, you can pinpoint the root cause of the issue and restore your system to optimal functionality. Should the error persist, seeking professional technical support is recommended to ensure the stability and health of your system. Addressing this error promptly will not only resolve the immediate issue but also contribute to the long-term performance and reliability of your computing environment.

author avatar
Derick Payne
My name is Derick Payne. With a deep-seated passion for programming and an unwavering commitment to innovation, I've spent the past 23 years pushing the envelope of what's possible. As the founder of Rizonetech and Rizonesoft, I've had the unique opportunity to channel my love for technology into creating solutions that make a difference.

1 thought on “How to Fix Blue Screen Errors – KERNEL AUTO BOOST LOCK ACQUISITION WITH RAISED IRQL”

  1. Hi Derick,

    I came across this post whilst investigating this happening in our virtual environment. There was a very specific set of circumstances causing this to happen:

    VMware tools 12.2.5+
    Windows Server 2016 (September 23 Patch)
    Sophos AntiVirus
    MSedge 117

    I found that the operating system would bluescreen if you launched edge whilst it had network connectivity, throwing the same error you mentioned above. After some testing removing any of the above components resolved the issue.

    I found that the least disruptive way to stop this occurring on our virtual infrastructure was to stop the VMware vShield Endpoint driver (sometimes I find this is called NSX Guest Introspection Driver) and disable the service with the below options:

    Powershell
    get-service vsepflt | stop-service | set-service -startuptype Disabled

    CMD Prompt
    net stop vsepflt && sc config vsepflt start=disabled

    I think this would be useful for someone investigating the same issue but I don’t blog so I have no where to put it.

    Thank you
    Kind Regards
    Dave

Leave a Reply

Scroll to Top